Skip to content

Sandia National Laboratory may get nuclear fusion to work….soon.

November 15, 2010
A homemade IEC fusion reactor created by a hig...
Image via Wikipedia

Sandia effort images the sea monster of nuclear fusion: the Rayleigh-Taylor instability – Sandia News Releases.

More accurate simulations could lead to “break-even” fusion in foreseeable future

ALBUQUERQUE, N.M. — A new X-ray imaging capability has taken pictures of a critical instability at the heart of Sandia’s huge Z accelerator. The effort may help remove a major impediment in the worldwide, multidecade, multibillion dollar effort to harness nuclear fusion to generate electrical power from sea water.

“These are the first controlled measurements of the growth of magneto-Rayleigh-Taylor [MRT] instabilities” in fast Z-pinches, said project lead Daniel Sinars.

MRT instabilities are spoilers that arise wherever electromagnetic forces are used to contract (pinch) a plasma, which is essentially a cloud of ions. The pinch method is the basis of the operation of Z, a dark-horse contender in the fusion race.

 

Z Machine PinchThis is an optical photograph of an aluminum z-pinch target tube installed in the Z machine. Click on the thumbnail for a high-resolution image.

A pinch contracts plasma so suddenly and tightly that hydrogen isotopes available from sea water, placed in a capsule within the plasma, should fuse.

That’s the intent. Instead, the instability rapidly crimps the cylindrically contracting plasma until it resembles a string of sausages, or shreds the plasma into more fantastic, equally useless shapes. This damaged contraction loses the perfect symmetry of forces necessary to fuse the material.

Fast pinches at Z, which take place in less than 100 nanoseconds, already have produced some neutrons, a proof of fusion. But a major reason not enough neutrons have been produced to provide a source of peacetime electrical power is the MRT instability.

Sinars led seven experimental shots to map the disturbance. The experiments were motivated by a concept proposed last year by Sandia researcher Steve Slutz.

Traditionally, scientists would use an array of spidery wires to create a compressed, X-ray-generating ion cloud. The X-rays were then used to compress fusion fuel.

Slutz suggested that the magnetic pinching forces could be used to directly fuse fuel by compressing a solid aluminum liner around fusion material preheated by a laser.

Because the new concept would not produce X-rays as a heating tool but instead relied on directly compressing the fuel with magnetic pressure, the MRT instability was the primary threat to the concept.

“Once we started looking at solid liners it was easy to conceive of doing a controlled experiment to study the growth of the instability,” Sinars said.

This is because experimenters could etch the solid tubes, creating instabilities to whatever degree they desired. Accurate etching is not an option with fragile wire arrays.

 

X-rayThe top image is an X-ray (6.151 keV) photograph of the same target (see photo above) compressed by electromagnetic forces. The sequence of images below is cropped to show both outside edges of a cylinder from a camera’s point of view as they distort over time in the grip of the MRT instability. Some of the jet-like features are approximately 50 microns, smaller in diameter than a human hair. Click on the thumbnail for a high-resolution image.

The MRT problem occurs because even minute dips in a current-carrying surface — imperfections merely 10 nanometers in amplitude — can grow exponentially in amplitude to millimeter scales. In the experiments by Sinars and others, the tubes were scored with a sinusoidal perturbation to intentionally start this process.

“The series of pictures over a time scale of 100 nanoseconds brought the life of the MRT into focus,” Sinars said.

Previously, competing computer simulation programs had given conflicting predictions as to the extent of the threat posed by the MRT instability, leaving researchers in the position, says Sinars, of “a man with two watches: he never really knows what time it is.”

The more accurate simulations will enable researchers to better tweak the conditions of future Z firings, more effectively combating the effect of the instability.

Researchers believe that with thick liners and control of the MRT, the Z machine could achieve an output of 100 kilojoules to match the 100 kilojoules input to the fuel to start the fusion reaction. “That would be scientific breakeven,” Sinars said. “No one has achieved that.”

That day, he says, may be just two to three years away.

The work is reported in a paper in the Oct. 29 issue of Physical Review Letters and is the subject of an invited talk on Nov. 11 by Sinars at the American Physical Society Plasma Physics meeting in Chicago. The work was paid for by Sandia’s Laboratory Directed Research and Development program and the U.S. Department of Energy.

 

 

Enhanced by Zemanta
Advertisements
One Comment leave one →
  1. Erin Hamson permalink
    November 17, 2010 10:09 am

    Thanks for this post. It is nice to stay updated on the future! I referred to it in a blog post I recently posted about lasers. Here is the link: http://enoughsaid11.blogspot.com/2010/11/from-atoms-to-lasers-future-of-energy.html
    Thanks again.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: